Jump to content

Leaderboard

Popular Content

Showing content with the highest reputation on 09/16/2019 in Posts

  1. I would guess that has happened before, based on Paul and Sherry's and Bill and Martha's response. Which gave me another project for the honey do list. Since I would rather fix problems at home rather than while camping, I am going to replace the offending plug with a 90° plug. That should allow me to secure the plug and wire, possible with a tie wrap. Thanks for the problem to solve, it more fun than chess, for me. Mike
    2 points
  2. Funny you should ask! I’m still catching up on missed forum activity, so I just saw your question about the Indiana Dunes NP. It used to be Indiana Dunes National Lakeshore until becoming a NP in February of this year. It surrounds Indiana Dunes State Park which has different fees and rules. We stopped at the Dunes on our way back from a family reunion in Illinois. We stayed 2 nights in the Dunewood campground. It is an older campground, the showers and restrooms were nice and clean as was the campground. EDIT: Sorry, my bad! There is no electric at Dunewood Campground. Electric only With dump station and central water as most cold weather campgrounds are. I thought the parking pads were on the small side, but each camp site had a large picnic table and fire ring area. The campground is very shady with lots of new growth trees. The bugs were not bad for a shady camp site. The park is rather unique in that it is more urban and industrial. The dunes were impressive unless you compare them to White Sands or the Great Sand Dunes NP's. The beaches are gravel with mostly round stones. We arrived Labor Day afternoon and the State Park was a zoo. We checked in the campsite and chilled. Rain in the morning sent most of the tent campers away and the crowds were much smaller everywhere we went on Tuesday. Access into the park was easy as we came in from the west on I-80 and left on Hwy 20 and then back on l-80 to Elkhart and the museum. Do check it out if you are in the area, it’s worth the visit and at $25 for 2 nights with the NP pass, it’s a bargain. Mike
    2 points
  3. Remove the three left kitchen drawers. Remove the plywood panel at the back. See picture for location of the plug. Before you put everything back together move the weighted sink hose so that it is between the back of the drawers and the back wall of the cabinet.
    2 points
  4. I think like a lot of Elite II buyers, we were torn between the twin beds vs the king. We chose the twin, but not so much for the size or comfort of the beds as it was the utility of nightstand and easy access to the overhead compartments. But we liked the idea of having a table and a large lounging area in the back, and so I set my mind on the idea of trying to have both. At first I designed a custom table for the back that would latch into the nightstand in the back with a pole in front, similar to how the dinette table works. I showed it to Oliver and they thought they'd give it a try, but as time went on and things got delayed or forgotten, I sort of gave up on that idea and asked if they would just sell me the standard table top and legs and I would figure it out. They did, and it was a big mistake since I could never figure it out. The table was just too heavy and bulky to put up and take down, and there was absolutely no place to store it. Plus the height with the standard legs was too short for the mattresses we had (another poor decision on my part). So on our first trip it was labeled the Albatross Table and it was just in the way the whole time. It didn't make another trip, just the two mounts screwed to the floor to remind me that not every problem has a solution. But the solution does exist in the Lagun table. I'd seen them before in the king bed model but I had sort of dismissed them as being too small to be of use. But that was before @rideadeuce started this topic about their upgraded table top. Their top was much larger, foldable, and just generally nicer looking than what I'd seen before; and so it clicked with me that with the Lagun mount, we could have a foldable table that could easily be stored or moved out of the way for access to the upper storage. Also the height could be whatever we wanted and unlike the table we had, could be quickly locked for travel. There were just two problems for us - the mount in it's normal location would block the nightstand drawer; and on top of that, we had opted for an access hatch to the basement right in that same spot where the Lagun is usually bolted to the hull. I needed a way to mount the table to the side somehow. So I made one of these - This contraption is made out of 15 Series extrusion from 80/20. I cut, mitered, and erector setted this little block and associated connectors to go beneath the bed overhang. The Lagun mounting plate (the vertical piece) bolts to the mount and then the whole thing gets bolted to the side wall under the bed in four places and to the bed overhang in four places. It looks complicated but if you have a miter saw and can play with Legos, you can build it. Here are some pics of the block in place so you can see how it mounts. The top two bolts on the Lagun plate bolt into the side of the bed extension, then there are two bolts on the block that secure vertically into the base of the extension, then another four bolts that go into the side wall of the base of the bed, opposite the basement. I marked and drilled for the two vertical holes first, then temporarily bolted it in place to mark all the other holes. You need to do this since not all of the surfaces are perpendicular to the trailer or one another. But the flat bottom of the bed extension runs parallel to the floor so if you use that as your starting point then the table top will end up parallel to the floor as well. The end result is extremely solid - The table top I chose is the 35" Nautic Sail top from Marine Teak. Look around on their site and you'll find a number of styles and sizes, any of which would be a great choice. (This is the same company as this one, btw, but they have more choices in table tops on their UK site.) I debated oiling it, but came to my senses and coated it in a couple layers of low gloss poly. Taking it apart to seal is no problem, but you do have to keep track of a number of shims that go under the hinges to make them flush to the wood. So here's the final result. I really like the versatility of the top. Use it folded, unfolded, bar height, table height, sideways, lengthways, stick it over the bed for travel or to get it out of the way, or...however. With the mounting plate where it is, we can raise the table hight enough to clear the nightstand and lower it enough that it sits on the bed locked in place for travel. As you can see, the drawer clears just fine. The table will work best once we have our cushions made to replace the mattresses, but we just did a quick weekend trip with it and it works well even as it is. And best of all, it fits in the closet -
    1 point
  5. I was looking around for first night stop leaving Elkhart next May, as we're probably doing another delivery. This newly designated National Park is a little over an hour away, off 20. It looks beautiful. ( and campground opens May 15!) https://relay.nationalgeographic.com/proxy/distribution/public/amp/travel/national-parks/indiana-dunes-guide-what-to-do Sherry
    1 point
  6. Hi all, We have adopted Hull #170. It does not have a name as of yet. It will be taken care of by John & Cheryl ( Muppy) And Shorty The Dog. Looking forward to spring 2020 and all the adventures ahead. Muppy
    1 point
  7. Spotted at the back of long term parking in Oakridge, Oregon, just prior to the start of the Cycle Oregon Classic ride (CycleOregon.com). ........ A classy, high quality, well built RV ...... parked next to an Airstream.
    1 point
  8. I measured an expedition with the bench seat, with the middle 2nd row removed a National Luna 40/55/60/65 truck freezer should fit. It will stick out above the folded-flat floor by about 7". Still a better option than the cheesy console that comes in some of the Navigators
    1 point
  9. You'll probably want to check the outlet under the sink area. Some people have reported that the fridge 110 plug has come loose, or been knocked out completely over time. I believe the dc power is hardwired, and of course gas is poweted by dc board. On your system. The 110 plugs into a household type outlet, out of view, under the drawers.
    1 point
  10. A word of caution. A jumper wire can turn on the lights. But, as was done at the Rally, the bright LED lights of the Ollie can be offensive to other campers. So maybe should only be done at an Airstream Rally to outshine them?
    1 point
  11. Make sure you get gas well before getting anywhere near either Park. If you're going toward West Yellowstone, even Big Sky is too late to escape the 30 to 50 cents per gallon higher price. Bill
    1 point
  12. We just left Glacier. Stayed at Two Medicine campground, views are breathtaking even with the clouds and rain. Crowds weren’t too bad, depending on where you’re at. Overnighting in Bozeman on our way to Yellowstone and Grand Teton.
    1 point
  13. Another owner recommended this holder for the plug and I can second the recommendation. It's sturdy, holds the plug securely and seems to do a great job of keeping it dry. Especially if you combine it with a jack cover like this, you shouldn't have any problems.
    1 point
  14. Thanks for the comments, we are in Helena and have decided to bail on theMissouri Breaks this trip, due to the heavy rains. I do not want gumbo, no thanks. It is supposed to clear Wednesday evening so we are going to shoot up Thursday morning to Glacier and hopefully see some really big mountains. The only other time we have driven Going to the Sun Road, FORTY years ago, they were completely socked in with dense clouds.... Last night we stayed ay Georgetown Lake between Philipsburg and Anaconda. This is Piney Campground, NFS and $7.50 with the Geezer Pass. It is a huge campground but there were only three other trailers there. Plus black and cinnamon bears. It was 34 degrees by morning. What a beautiful spot, but it is very hard to take good pics when the clouds are thick. John Davies Spokane WA
    1 point
  15. Last time I was there, it was on the mountain bike. If you do dare to go into Canadia, the Banff national park is pretty sublime, but might limit your anti-bear tools. No great ideas for camping - I was sleeping under an emergency blanket on the side of the trail. Saw some interesting animals (big cats and bears), but none of them wanted to eat me. Maybe that will calm the wife down?
    1 point
  16. The Breaks is a love it or hate it kinda place. I personally love it and have spent a total of several years up there. We spend most of our time on the other side though. If you were in Winifred and went down to the ferry (stops running soon I think), cross the river and roam your way towards Chinnook or Big Sandy through the Bear Paws. BTW, there is a surprisingly mean burger in Winifred at the bar. I can't tell you much info for camping on the route you're headed on but if its like the rest of the breaks, you can probably just pull over anywhere and nobody will bother you. You can also most likely pull your trailer if you don't mind giving it a workout like I do. The thing you really need to watch this time of year though is rain. Maybe you're familiar with Gumbo? It doesn't take much moisture to turn it into a sloppy mess out there that only an ATV with chains can get through. As we get closer to winter if you get stuck you can just wait until morning to get out when the ground is frozen. Its dumping rain where I am just east of Missoula right now, not sure what its doing up on the hi-line. NOTE: If you have dogs, there is a mean case of blue green algae going around this year even in flowing water. My sister in laws pup died within 2 hours of swimming in the creek a couple weeks ago. Also, much like eastern washington, it can be littered with rattle snakes out there. As for elk, if you know where to look they are everywhere out there. Not sure if you want to see them in the wild or if you're just heading to Slippery Anne, though even at Slippery Anne they're gonna start heading for the hills fairly soon. Browning can be fun if you like to booze it up with some rowdy natives, but for the most part you're gonna wanna keep moving. In fact all of the reservations in the areas your going can be rough. Rocky Boy, Hays, Browning. Have fun exploring. The sunsets/rises and stars in the breaks are hard to beat. You're covering a ton of ground in only two weeks. If you find yourself heading through Clinton on your way to Helena and want a place to park for a night, send me a note. I live up Rock Creek.
    1 point
  17. To put this issue to rest, the factory stopped installing the valve in the black tank flush line. There is still a back flow preventer.
    1 point
  18. Donna and I went Summer glamping for the first time last weekend. We camped at Camp Creek Campground in Mt. Hood National Forest. It's the closest campground to Timberline where I train on the Palmer Snow Field throughout the Summer. We had a fabulous time being in the forest, going on hikes and dining at local restaurants. Our next adventure is yet to be determined, but we're excited about our week in Sisters Oregon in September for the Sisters Folk Music Festival. Happy travels everyone!
    1 point
  19. [postquote quote=174037][/postquote] Good Choice.
    1 point
  • Recent Achievements

    • Olive2Roam earned a badge
      Very Popular
    • cowgs went up a rank
      Rookie
    • Twist earned a badge
      Week One Done
    • The Pilgrims Journey earned a badge
      Week One Done
    • FloraFauna went up a rank
      Collaborator
    • Lmdaisy earned a badge
      Week One Done
    • Alamoman earned a badge
      One Month Later
    • WanderJack earned a badge
      One Month Later
    • Douglas Rink earned a badge
      First Post
    • ADKCamper earned a badge
      Conversation Starter
    • Martin White earned a badge
      Week One Done
    • 9905 earned a badge
      First Post
    • Pat McKinney earned a badge
      Week One Done
    • Pat McKinney earned a badge
      One Month Later
    • Pat McKinney earned a badge
      One Year In
    • Douglas Rink earned a badge
      Conversation Starter
    • Ken Root earned a badge
      One Month Later
    • Robin earned a badge
      Conversation Starter
    • Martin White earned a badge
      Dedicated
    • dkeen went up a rank
      Apprentice
×
×
  • Create New...

Important Information