SeaDawg

Unfortunately. You'll need more truck than the cybertruck or the Rivian to pull one of these. My understanding is that even the 24 footer Living vehicle starts out at a whopping 11k dry weight, max towing capacity of either of these electric trucks, and goes up from there. I see they have a new cyberTrailer coming on their website. Hopefully it will be light enough...

Awesome. We'll look forward to your experience.

I don't know what Oliver uses. But you can find many choices at an economical price on Amazon. https://www.amazon.com/s?k=rv+shower+curtain+track+types&adgrpid=125660158984&hvadid=631614029273&hvdev=m&hvlocphy=9012099&hvnetw=g&hvqmt=e&hvrand=16653121414461455678&hvtargid=kwd-923141368212&hydadcr=1279_13554307&tag=hydsma-20&ref=pd_sl_vqweog91j_e

That is great news, Rodney.

I'm so sorry. Things like this happen so easily when we get excited about a new adventure. And, especially when tired. Thanks for the honest warning.

I couldn't find the correct grommet, so I checked my collection of cabinet door bumpers, and used some of those.

@Steve and MA, have you made Truma and Oliver aware of your disappointing door issue? I also think that's a ridiculous price for a replacement door. I just looked up a replacement (metal) door for our Girard. It's less than $60 on Amazon.

I can certainly follow your rationale. We've had 6 gallons, and currently a Girard instantaneous, installed by Oliver 7 (?) years ago. (Their first instantaneous install, before they were authorized by Truma.) It's been so far trouble free, and not hauling 6 extra gallons of water cuts our weight by almost 50 pounds. However, I'd likely go back to a traditional 6 gallon if it failed. We almost never camp with hookups, so "endless hot water" is pretty meaningless for us, though a nice advantage for those who do. Our Girard runs strictly on gas, which is also ok with us, since we rarely have hookups. But, the also electric of a 6 gallon is a plus for those who do. We all have different camping styles. Glad you found what's right for you. PS add yet another engineer to the list of many. I think Oliver attracts the engineering minds because of the quality engineering of the unit. I know that's what sold my husband, the engineer in the family. I'm just the 40 year apprentice. 😃

We've used ours a lot, over the years. The 12v plug was standard issue in 2008, mounted under the eyebrow over the lower fridge vent, with a waterproof cap. Charging phones and lights, running a small 12v fridge, the tire inflator, and especially helpful in certain seasons to run a FanTastic small 12v box fan to blow the gnats away, it's been very helpful.

First campfire breakfast of 2024, on a beautiful western NC Sunday morning.

Thanks, much, @JWalmsley. You always have our backs. We appreciate you very much.

Nor has any other facility I've ever been to. Trailers in repair centers often get moved around, a lot. The most I've ever seen is a scrap of 2x6, to protect the center's floor, or asphalt in the parking lot.

@George Alexa, the website address will be the same. You likely won't see any difference. We've been through this before. Just the host is changing tonight. Expect some delays and issues tonight. Hopefully, tomorrow will be all good.

No.

Chasing an unchocked, or improperly chocked trailer, can be very scary. Did that one time, dramatically. (Someone else's trailer, about to run backwards down a slight slope, through bushes, to a ten foot drop.) Fortunately, a lightweight, small trailer, and three of us from neighboring sites got it stopped. Good chocks, well placed, follow instructions above. No issues.

There are many types of vhb tape. Anyone know which type AM Solar uses?

I'm wondering how your fridge works at all, on gas. I don't have a photo of mine before we converted to a dc fridge, but I don't see how the exhaust heat can evacuate with all that insulation in place. If someone doesn't answer with a properly vented fridge, send in a ticket. I'm sure Jason or someone can tell you what it looked like before that retrofit...

We replaced the entire unit, and never looked back. The seal was broken on the old fan. It wasn't a huge job, and could have been done from a scaffold or ladder, on the outside, with longer arms than mine. The release mechanism, and bezel, on the inside are different, so my answer would be, I don't think so. Get the new fan, enjoy the overhead light, and don't look back. I think, personally, this should be an upgrade offered by Oliver. It's not a huge price difference, but I do so love an overhead light, and a fuse that can be replaced without tearing the fan apart. I was concerned several years ago, when we changed it out, that fan noise would increase over time. It hasn't, at least for us.

We still haven't installed an accumulator tank in rhe trailer. My solution to th night time racket is to just turn off the pump, through the night. "If it's yelliw, let it mellow." Hand sanitizer. Bottle of water. We had a huge rattle after the (properly sized) accumulator tank in the cabin. (We run off a tank and pump there, too, sometimes. ) We installed a longer line section, with an upward loop in a flexible section, and pretty much solved the problem. Peace and quiet at night. We chased the noise for a month. It's not fun, and every situation is different.

Make sure you read the date code.

Is this the Loctite product you're using? https://www.loctiteproducts.com/en/products/build/sealants/loctite_pl_marinefastcureadhesivesealant.html Yes, it is.

Looks like you have two bolts on each panel, so it would be a tough change up to allow you any way to lift one side of the panel. Our earlier mounts were from am solar. You could send them a pic in an email, and discuss other options. Great folks. Always helpful. We have one bolt (on a threaded knob) on each short side of our panels. If it's any comfort to you, we rarely adjust the panels. Too much ladder work, unless we're in a spot for a very long time. Adding in some portable solar is a much easier, and safer/ground level, alternative. That's our solution, anyway.

I used a number of sika products, building our house. I don't think I'd try 221 on an Oliver, as I "think" it's greatest use is metal to metal. I'm sure sika has an appropriate product in their lineup. It's a great company. 291 would probably work, but it's an adhesive/sealant, possibly close to 3m 4200. Requires extensive mechanical removal. Polyurethane , elastic. So good for movement. But, replacement, if and when necessary, could be a lot of work. We went with a polyether product, loctite marine fast cure, several years ago, for boats and the Ollie. So far, so good. I think we're 4 years in. Stays white. Decent flex. If you buy from Lowe's or Depot, make sure you read the date code. And, use it all up. It doesn't last long. Not cheap, either, but longevity vs initial price is important to us. The Loctite bonds to everything in our usual realm... teak, aluminum, fiberglass, plastic, etc., as it's polyether based. Whatever you choose, I'd choose something that says "marine" or "for use above and below waterline". I know we don't drive our Ollies on the water, but some of the gulley washers we've experienced make me appreciate marine sealant quality. We use synthetic butyl tape as bedding, whenever possible. Old school, tried and true, eternally flexible. Windows, fans, boat ports, etc. Rooftop appertanences take a beating in Florida sun. After a few days of allowing butyl to set up, we (I should say,usually Paul) trim the edge with a fine bead of loctite, to block uv. Maybe unnecessary, but, it looks good, especially when Paul does it,instead of me. I'm not bad, but he's better. (Give credit where due, right?) Butyl is ONLY a sealant, not an adhesive, so requires mechanical fasteners to keep everything in place. As far as removing silicon residue, I'm not your person. I don't think it has a place in the fiberglass world. We don't use silicon. It seeps into the pores, and is very difficult to remove. Sika makes many fine products. If you find one appropriate for the Ollie (fiberglass, plastic, and metal compatible, decent elasticity/flex, uv resistant), I'd love to hear about it. They're not inexpensive, either, but we've had great experience with some of their products in our home.

I don't believe that is a true statement. Though Jason may be training, I believe other qualified team members will step up.