AlbertNTerri Posted March 21 Share Posted March 21 14 hours ago, MAX Burner said: We used the same one that @topgun2 refers to: The "O-ring" keeps paper goods nice and dry inside when the wet-head is being used as a shower... Here's a pic of our install/mod: Cheers! How do you like having the door swinging in that direction? Do you think it would be more convenient if it swung the other way? It's one of my future projects that I'm planning for. I really like the way you cleaned up the inside of the vanity, I hope mine turns out as nice. a. 1 Albert & Terri Sterns Paonia, Colorado Elite II Hull #1125 Standard Floorplan / 2017 Ford F250 gas Link to comment Share on other sites More sharing options...
theOrca Posted March 23 Share Posted March 23 On 8/3/2023 at 6:27 PM, rich.dev said: @mountainoliver @NCeagle I absolutely love what you guys did here and want to do same, however, I cannot find this shower faucet mixer/diverter anywhere! Where did you buy it? Search for "scanvik mixer" assembly. theOrca, 2020 Legacy Elite II, Twin, Hull 615 Tow Vehicle - 2016 Ram 1500, Hemi, 8 Speed with 1500# rear springs and Goodyear bags. Link to comment Share on other sites More sharing options...
Moderators SeaDawg Posted March 23 Moderators Share Posted March 23 (edited) Scandvik catalog link. The one in above photo is likely the first, upper left. Our now 16 year old scandvik faucets in our trailer are still going strong, as are the 15 year old replacements we put in the boat. I like their quality. Good luck. https://www.scandvik.com/index.cfm?method=products_Category&catID=325 Edited March 23 by SeaDawg 3 2008 Ram 1500 4 × 4 2008 Oliver Elite, Hull #12 Florida and Western North Carolina, or wherever the truck goes.... 400 watts solar. DC compressor fridge. No inverter. 2 x 105 ah agm batteries . Life is good. Link to comment Share on other sites More sharing options...
rideadeuce Posted June 3 Share Posted June 3 (edited) After looking at depth in previous installs of hatch door and obstacles this is probably not a viable solution for storage. (below) Edited June 3 by rideadeuce - Mike Brentwood, TN 2018 Elite II - Spirit of Adventure Hull #308 - 2016 Toyota Tundra Limited 5.7L Class IV hitch with 12k lb coupler Starlink, Cradlepoint cellular modem, Victron Multiplus II 12V 3000W, Ekrano display, Orion XS 50amp, Atmos 4.4 15k AC/12K Heat pump, Nova Kool 5180 fridge, Epoch 460aH x2, 520 watts solar, Custom rear bicycle rack, Alcan Springs, Bulldog shocks, Falken H/T02 tires Link to comment Share on other sites More sharing options...
rideadeuce Posted June 3 Share Posted June 3 (edited) This one is made more for storage but the box is not removable but I still think I would rather have this than just an access door. How often do you need to get to the plumbing? My main problem with using the OEM shelf is the ability to get bottles in and out... it is just not very user friendly. They make custom sizes and configurations... maybe one could cut out the box to fit around sink drainage pipe. https://www.deepbluemarine.com/products-detail.cfm?ProductID=504 Mike a Edited June 4 by rideadeuce - Mike Brentwood, TN 2018 Elite II - Spirit of Adventure Hull #308 - 2016 Toyota Tundra Limited 5.7L Class IV hitch with 12k lb coupler Starlink, Cradlepoint cellular modem, Victron Multiplus II 12V 3000W, Ekrano display, Orion XS 50amp, Atmos 4.4 15k AC/12K Heat pump, Nova Kool 5180 fridge, Epoch 460aH x2, 520 watts solar, Custom rear bicycle rack, Alcan Springs, Bulldog shocks, Falken H/T02 tires Link to comment Share on other sites More sharing options...
Going Posted June 6 Share Posted June 6 (edited) On 12/30/2020 at 8:14 AM, NCeagle said: And now with the same shower mixer as Mountainoliver... Mountainoliver, the check's in the mail! But... I don't know how to get anything delivered by the post office these days. 😉 So glad I didn't have to rip the caddy out again - sure made this addition easy! Thanks for this thread. I am getting ready to do this mod using the High Sierra head partially because it looks very "angle" versatile so it can be pointed downward at a greater angle then others and because this seems to be a quality head. What GPM did you get? 1.25, 1.5, 1.8 or 2. Just curious and if you are still satisfied? Also, did the head fit into the existing mount/hanger ok? I am also installing the Marine hatch and this control: https://www.amazon.com/dp/B0CTQDRF36?smid=A1ACPRXA78MXSS&ref_=chk_typ_imgToDp&th=1 Edited June 6 by Going Phil Drye Hull #246, 2017 Elite II Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now