Ollie model

[John E Davies]

My son is a computer game programmer and they recently got into 3D printing. Here is what arrived for Christmas...... It was a total surprise.  The $5 bill is for scale. The hull is exactly 6” long, the LE2 hull is 18’, so this makes the model 1:32 scale. There are lots of truck models in this size, my Land Cruiser 200 would be 5.9” long at this scale. ..... https://www.ebay.com/itm/Toyota-Land-Cruiser-4x4-1-32-Scale-200-VX-Wagon-SUV-Diecast-Model-Mini-4wd-Car-/362667098231

And this is what the model looked like before final trim “processing”, I have NO clue how that is done.

They were not able to find an actual data file online, they did this completely from scratch using photos. They are willing to share the print file if somebody wants to try this at home. They are thinking about dividing the build into layers, so you could print the tires, frame and hull in different colors and then join them.... but it would not be too difficult to prime and paint the all white version.  And no, they do not want to start mass producing these. That would be something for the much rumored, never seen Ollie Store in Hohenwald.

Happy Holidays.

John Davies

Spokane WA

EDIT: FILES AND BASIC 3D PRINT INSTRUCTIONS. NO GUARANTEES, THIS IS NOT PLUG AND PLAY EASY. If you cannot download these files directly from this thread, let me know and I will try another method. Thanks to my son Ian!

 oliver legacy elite 2 trailer davies.stl

oliver legacy elite 2 trailer davies.3mf

“Provided as is - this shouldn't be too hard of a print, but you'll probably want to have a basic handle on printing. The print specifics below are what I used to print it. They're not required, but might serve as a starting point. Print specifics: Printer: Original Prusa i3 MK3S, 0.4mm nozzle Slicer: PrusaSlicer 2.2 Filament: 1.75mm Prusament PLA (stock profile in PrusaSlicer) Perimeters: 3 Layer Height: 0.1mm Infill: Gyroid, 5% Supports: On Raft: 2 layers (not necessary, just makes it a bit easier to get the tires round) Model print scale: 850% (~200mm x 66mm x 82mm) Total filament (including supports): 143g/48m If you slice it yourself, you'll probably want to put support blockers in the wheel wells - cleaning supports out of there is a pain. This will require some postprocessing - mostly just removing supports from small gaps. If your printer isn't precise enough, or if you're printing with a larger layer height, you may want to do some sanding to get the curves more fluid.” I. D.

[SNY SD UP]

John, That is SO COOL,  

When he is able to detail the interior... we want one.

 

 

 

[topgun2]

Talk about a "home" for a "Mouse" - very nicely done!

Bill

Edited December 26, 2020 by topgun2

[SeaDawg]

Wow! Your son did an amazing job on the model. 

This made my day. Thank you.

[Mike and Carol]

Wow, great job!  He should go into production, I’m sure there would be a demand!

[mossemi]

JD,  Please let Ian know the how much we appreciated his efforts in creating such an excellent Christmas present for you.  He did an outstanding job.

Mossey

[varmintshooter]

Very nice

[GaryJona]

Very cool

 

[LongStride]

That is way too cool!  Your son is very talented.

[John E Davies]

On 12/26/2020 at 4:24 PM, Mike and Carol said:

Wow, great job!  He should go into production, I’m sure there would be a demand!

3 D printing is most useful for a one-off prototype, or for making repair parts in the field (military) or in outer space, where a supplier is not readily available. it is way too time consuming and expensive for mass produced parts, that is what injection molding, die cast metal, and other methods are for. If the company wants to sell us Ollie trailer models in the future Ollie Store, they will have to have them mass produced in China by a toy manufacturer. An order of 100 would probably get the selling price down to a reasonable figure, I am guessing less than $100. A 3D printed one, with many hours and final hand trimming, unless you can do it yourself, would be way more than that. My son had a number of false starts before they got to this final version.

John Davies

Spokane WA

[GraniteStaters]

This is amazing! Paula

[Gerard Fulham]

that is amazing. He could sell those, I bet.

[Trainman]

Being a model railroader and model builder I would purchase one for sure. I would think he could get $100 each that is unpainted as your model is. If he doesn't what to make them I'm sure if he would share the program with someone who would manufacture them they could do it. As far as sales go I personally don't think there would be a large demand for them, if your not into models that I don't really see Oliver owners buying them. Like I said, I would take one, I can detail one and make a top looking model out of the base model. Why not offer the base model and see what takers there might be, you can pickup some quick pocket change, but then again I have no idea on what the base cost is to manufacture one. 

 

trainman

[Mainiac]

Love it. Bet it would sell in the Oliver Owners Store. Nice to look at, and take Home, after touring the plant and placing an order. Something to "Show and Tell" while waiting. A buy with the hat, mug, and vest...

Edited January 5, 2021 by Mainiac

[John E Davies]

Bumping an older thread, just in time for Christmas presents. My son has NO desire to make more of these to sell, please do not ask again. If one of you has a 3D printer and wants to start doing so, feel free, and good luck. If you have any problems downloading the files, let me know.

John Davies

Spokane WA

[Jammintc5]

I would be more than willing to 3d print these if any one is interested. Pictures to come. 

[John E Davies]

This morning I got a new Land Cruiser 200 to go with “Mouse”. Thank you Ian!

 

I hope everybody has a very satisfactory holiday season.

John Davies

Spokane WA

[topgun2]

Slick how he even made the receiver hitch so that it would accept the bulldog - nicely done!

Bill

[SeaDawg]

Wow! He even got the snorkel. What a wonderful gift.

[Geronimo John]

Oliver could benefit from the aerodynamic improvements made on the model:  Eliminating the vent and antenna from the frontal over the top primary flow zone, having the AC top slanted up a bit in the rear to reduce tongue weight at high speeds.  And it brings to mind suggesting that the front center high roof section could be expanded in width to allow the solar panels to hide full width behind it to also improve the aerodynamic efficiency... and give us a bit more ceiling height in the bath and closet too! 

..... me thinks at least one of us has too much time on our hands today!  🙂

Regardless... really cool modeling!   

[CnC]

I think your son was astute in recognizing what pleases you.  I liked that you were humble in recognizing he now knows things you don't.  Been there... 🙂

Charlie

[Trainman]

Being and model railroader I have purchased many of this companies model parts, etc. The company is Shapway, they will make 3D parts, etc. items you may want, they will do the design and give you quote on price, size will be a cost factor for sure. I feel you will need to furnish all the dimensions and may need approval from Oliver. working with Oliver would probably be your best way to get this done. Here is the website,   https://www.shapeways.com/?utm_campaign=search_branded_mobile&utm_source=bing&utm_medium=cpc&utm_term=%2Bshapeways&msclkid=9522bbe42d0410f010c7da3730557a0d

 

trainman