Made in USA leaf springs

[Patriot]

1 hour ago, MAX Burner said:

We just returned home after our annual 2-week MC ride up the spine of the Rockies and were absolutely blessed with the best WX ever!  3,800 miles, 8 states, 6 national parks/monuments, and untold numbers of margaritas....  like @Patriot describes, we enjoyed wall-to-wall blue skies every day of the ride.  Spectacular fall colors from Ouray to Silverton, BTW!  Now, its all about getting the Casablanca ready for a Thursday departure on our long weekend at Columbus, NM and Palomas, Old Mexico...

 

Cheers, All!

Hey Max, awesome vid and ride! Wow! Looking forward to the fall colors and getting in a little seat time when we get home whenever that is? Ha! Glad you had a safe and fun trip! Thanks for the color report, the Aspens are little late this year here in YS, the beauty of this park never ends.

Glad to hear you getting Casablanca ready to roll again! 👍🏻🇺🇸

 

[jd1923]

I know somewhere in the 23 pages of this thread, somebody posted the OEM part number for our leaf springs that can be purchased on eTrailer.

Was under our hull today and all 4 OEM leafs look excellent, but at $60 I’m thinking of buying one for the toolbox. Also making sure I have the long sockets to replace one on the side of the road. Thx

[Mountainman198]

Look on the spring retainers. Mine was stamped there. Model PR4B is what came from the factory on my 2021 E2, 3,500lb axles, 4-leaf springs

[Mountainman198]

25 minutes ago, Mountainman198 said:

Look on the spring retainers. Mine was stamped there. Model PR4B is what came from the factory on my 2021 E2, 3,500lb axles, 4-leaf springs

And here is the replacement part number that Oliver service gave me to replace my original springs

[jd1923]

11 hours ago, Mountainman198 said:

Look on the spring retainers. Mine was stamped there. Model PR4B is what came from the factory on my 2021 E2, 3,500lb axles, 4-leaf springs

Thanks, Mountainman for all your input on this thread. Mine does not have a label like this (see pic). I had a conversation with @mountainoliver who has a 2017 and Ken sent me some specs of what he had ordered. They all seem the same.

This is what you suggested: Amazon.com: TexTrail 9150014 Double Eye Trailer Leaf Spring for 3,500 Lb Axle - 4 Leaf - 25-1/4" Length - 2 Pack : Automotive

What does everybody think of the items below? The leaf springs are almost double in cost, but both of these items are Made in USA. Do we really need the heavier leaf, or just something dependable? These would be half the Alcan cost, but of course 4-leaf 1750# springs. They do not have the 5-leaf design where the second leaf is longer, so these could have the same failure point.

TruRyde® 4 Leaf 25 1/4" Double Eye Trailer Leaf Spring with Bronze Bushings 1750 lbs. - SW4B-BR | Southwest Wheel®

SOUTHWEST WHEEL® Southwest Wheel® U-Bolt Kit for 5,200-7,000 lbs. 3" Trailer Axle - APUBR3BX | Southwest Wheel®

I remember reading where some Oliver owners were concerned with mounting heavier springs that were basically for 5200 LB axles.

Edited October 1 by jd1923
Added picture

[rich.dev]

@jd1923 John another option is the Dexter 2400lbs 4-leaf spring part# PR4, on special now for $49 

[mountainoliver]

That looks like a great deal. The two spares that I purchased from Dexter are made in china and all of the springs that they sell are made in china. Probably most if not all of the really inexpensive ones from Amazon are also made in china. Had I stumbled across this supplier with USA made springs of this capacity I would have purchased all four and just replaced them all. I’ll probably do that this winter whenever we get back home from our trip. I don’t have any complaints about the current spring capacity so I’ll stick with the 1750# springs.

[Joe and Janet Childers]

Another broken spring to report Curb side 2021 hull 588 LE 2.We were able to find a replacement at Nothern Tools to get us home. All springs will be replaced before our next trip 

[2008RN]

My Dexter leafs on the rear were flat towards the rear of the trailer. I ordered the Alcan springs.  I had problems with Alcan’s shackles. The first set they sent me the holes were oversized and the knurls on the bolts  just slid in. The second set were the right size, but they bent shackles when they punched the hole. The end of the bolts after being pressed in were about .230 out of alignment which makes assembly impossible. The Dexter shackles and bolts are .005 inch or less for alignment making assembly easy.

Alcan said they would let me know when they figured out how to produce shackles that would work and that was on Oct 15th. I’m still waiting. I put the original Dexter shackles back on and set hummi back on the ground. 
The bottom of the second leaf  to the ez-flex measures around .040 inch universally.  Way too close to take her for a spin. 

I've gotten busy with a small remodel job on a wall into the kitchen. I need to get it done for the new fridge to fit. Once I get the stove and fridge set up, I will shift back to the shackles, if Alcan has not came up with a solution, I will buy the metal and make my own, I have a buddy with a vertical mill. 

If / when Alcan replies back to me I will update you.

The 2000# Dexter leafs are starting to look a reasonable solution. I’m sure  I will be happy when I get this back on the road. glad I haven’t retired yet I’d be a little pissed to not have the trailer available for a couple of months.

[Geronimo John]

On 10/1/2024 at 12:45 AM, Mountainman198 said:

Look on the spring retainers. Mine was stamped there. Model PR4B is what came from the factory on my 2021 E2, 3,500lb axles, 4-leaf springs

A very easy swap is to just use the PR4 Dexters.  They are 2400 pound rated.  Perfect fit replacement for the PR4B the lighter 1750 rated ones.

Edited 15 hours ago by Geronimo John

[Gliddenwoods]

13 hours ago, Geronimo John said:

A very easy swap is to just use the PR4 Dexters.  They are 2400 pound rated.  Perfect fit replacement for teh PR4B the lighter 1750 rated ones.

If I purchased the PR4 Dexters as travel backups, and I have a roadside trip break,  would they be a straightforward replacement install for a local garage? 

I have a 2022 Legacy II.

With the history of breaks that others have had I am really considering packing an emergency replacement for our next long trip. I assume I should order two.

Thanks.

[Geronimo John]

7 hours ago, Gliddenwoods said:

If I purchased the PR4 Dexter's as travel backups, and I have a roadside trip break,  would they be a straightforward replacement install for a local garage? 

I have a 2022 Legacy II.

With the history of breaks that others have had I am really considering packing an emergency replacement for our next long trip. I assume I should order two.

Roadside Spring Failure:  If I were in your shoes, I would make sure I had a jack and three each  2" X 6" X 11 inch blocks of wood.  Elevate the broken spring and slip the lumber between it and the frame.  Lower and maybe use a couple of band clamps or at least stout zip ties to secure.  Then travel carefully to a recommended shop.  At least one owner just drove there carefully.  That could be risky to your fiberglass wheel well area.  Hence my insurance blocks suggestion.

Local Garage:  It is an easy job with the right tools.  But not one that you would want to do on the side of the road or at a rest stop.  To your question, YES, a local garage will have floor jacks, hydraulic jack, jack stands, dead fall hammer and other tools to make it just a simple spring change.  It took me a couple of days working alone. 

What to Buy:  You will need four springs.  Be sure to also order out BRASS shackle bushings and "U" bolts with the springs.   For other owners with older trailers like our 2018 OE2, when doing the springs I also changed out the EZ Flex.  

Two Reminders: 

Your suspension has bolts that have splines on the shank on the bolt head end.  Make sure that these bolts are "backed-up" (as in fixed in place with a wrench) on the head end, and only then loosened from the nut end.  If you turn the bolt head you'll spin off the splines.  That has resulted in several owners experiencing the suspension bolts actually walking their bolts nuts off.  This is especially imperative for the EZ Center Bolt. 

Also, the Wet Bolts (Ones with a Zerk on them), have two grease discharge holes near the bolt's shank center.  This is where the zerked grease comes out of the bolt to lubricate the suspension.  These two holes are recommended to be at 9AM and 3PM.  This allows for easier greasing.  Be sure to back up these zerked bolt heads when tightening as mentioned above.

GJ

Edited 12 hours ago by Geronimo John
typos