Leaderboard

@jd1923 This is the result of a Google picture search using the picture you posted. Mossey

??????????????????

Here's the one I think you're looking for. I've purchased through them before and they ship fast. And if you just need a replacement part and not the whole handle I'm sure they can help you with that too. 10777 Elbow Sprayer Handle with On/Off Valve EDIT- Here's the Aerator if that's all you need. 10459 Replacement Aerator

If you're looking for a convenient place to hook up your TST repeater there is ample space within the front jack head. +12V power is available and you can utilize the existing power switch currently used for the lamp or add an additional switch if you choose to.

As long as it’s stored next to the dairy drawer and not in the veggie drawer! 🤣

Mine didn’t come with one and I’m sure I’m way out of warranty so I’ll just stick with the I’ve been operating!

I have never installed mine mainly because it worked flawlessly without it. However with new truck that is supposed to recognize a TPMS system I have yet to get it to do that. Thinking maybe I should install it to see if that helps. Be nice to have it within the trucks system vs having a monitor on the dashboard.

Just looked at the receipt for my last order and they charged me $7 for shipping.

@CRM I ordered the $10 aerator and that was my total! 😂 They may add actual shipping cost to that later since they had a note about charging only actual costs.

Cool, thank you @mossemi, @CRM and @Tom and Doreen!

Someone had recommended this one, High Sierra.

A call to TST customer service and they may send you one no charge. Worth a try!

Still the same requirement by TST John! 👍🏻

One note about the repeater...even if you don't need the extra boost it gives you, you still need to install it for warranty compliance. At least that's the way it was 2 years ago.. John

Yes, mine did. It worked pretty well (without the repeater) but there were times when I would loose contact with one tire sensor for a period of time. Once I installed the repeater I’ve had no sensor drop-outs.

From the views of it on Amazon it appears that a repeater is included. My EZE tire has now worked without any problems or a repeater for 9 years. Bill

Yes folks - I believe we have a winner! Matt Duncan has sent me what I believe is all the material necessary for a quality print shop/service to reproduce these Oliver Hull Plaques. There is the original artwork via a digital program (adobe illustrator), and instructions. Anyone interested in receiving this should Private Message (PM) me with their email address and I will send them what Matt has given me. There are a number of vendors on Etsy.com that produce these types of metal "business cards". Bill

Tunnel Mountain Campground just outside of Banff. Home for the next couple weeks

Unity Reservoir -Oregon Electric & Water Sites Great spot to watch migratory birds. Bookable on Oregon State Parks

WATERTON!!!

I’am so excited to kick off another camping season! Time to dewinterize our Oliver (yeah) and get it ready for some summertime glamping! I love decorating my camper, I recently added this mural to the bathroom, keeping my botanical theme.🌿🍃🪴😍 I also will be adding some new videos to my Oliver YouTube series starting next month, so many new items, decor, tips and organization hacks to share. Like and subscribe to get notified.😃 Happy camping!

We got our LE2 with the bike rack mount and realized we will probably always carry our folding Ebikes in the back of the truck under cover. With that understanding we decided to add a cargo tray and locking box for general items needed for setup, and camp site necessities. Obviously weight is a critical factor so with the tray, box and gear inside we are shooting for less than 200# total. I'm sure we have succeeded after adding up the weigh of all items. The most difficult part is making the extended rails for the tray to mount on. I used the same T6061 aluminum that Oliver uses on their frame members. It's available in small sizes at local metal supply houses such as Metal Supermarket. The aluminum tubing drills and cuts easily with carbide woodworking tools. Use a little lite oil on the blade to keep the aluminum from fowling the blade. You must use good eye protection when cutting. I copied the way the bike rack rails were machined. Here's the results of the project: We have pulled the camper a couple times for local camp outs and the weight of the addition is completely unnoticeable while towing. The box is well made but light weight with locking double latch system. It has a double layer of aluminum in the lid and is foam filled to keep the contents from heating up too much in direct sun. The whole thing is very sturdy and at 220 pounds I can stand on the box lid to see the top of the camper with no effect to the box lid. Good traction and very solid. The softener tank is mounted with a tank wall mount and strap and is set up with quick connects and the standard hoses hook up in just a minute. The softener comes with a regeneration kit and it takes about an hour to perform a regeneration using a box of table salt. It will last up to 2000 gallons of water depending on the mineral content. No need to remove the tank for regeneration, just connect the kit to the external QD fittings and run the process. When done, you are good to go for a few more camping trips. No more hard water scale or rust on pluming fixtures. Remove the tank for winter storage inside the garage. I'm very pleased with the overall project. The box can be removed just as the bike mount is removed for spare tire access. You can actually access the spare without completely removing the tray assembly, Just slide it out about 6-8 inches and the cover and tire are removeable. I bought a self lit license frame and mounted to the back of the tray. I added a plug connection to the license light wire to power the new license plate light. I wanted a removable connection for obvious reasons. The connection is mounted on the lower part of the spare tire cover under the original license bracket. The old license plate bracket is still useable if the tray and box are removed. Tray: https://www.amazon.com/gp/product/B0017H9N4E/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1 Box: https://www.amazon.com/gp/product/B000MK4F68/ref=ppx_yo_dt_b_asin_title_o02_s01?ie=UTF8&psc=1 License Bracket: https://www.amazon.com/Car-License-Plate-Light-Chrome/dp/B00S1Y5TSK?pd_rd_w=jpDah&content-id=amzn1.sym.e8faeee7-63c9-4cb3-96e0-e50a41f3b35b&pf_rd_p=e8faeee7-63c9-4cb3-96e0-e50a41f3b35b&pf_rd_r=018MZ7KVYFFMGM0WSKBV&pd_rd_wg=mdsBW&pd_rd_r=eff79229-c9bb-45a5-8656-400649d9a361&pd_rd_i=B00S1Y5TSK&psc=1&ref_=pd_bap_d_grid_rp_0_1_ec_t Softener: https://www.amazon.com/gp/product/B09Y2KNFFL/ref=ppx_yo_dt_b_asin_title_o06_s00?ie=UTF8&th=1 Tank Bracket: https://www.amazon.com/gp/product/B00208DY76/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1

FYI: Mossey